Item
Login Accounting
Name
Secondary Method
PPP Accounting
Name
Secondary Method
Portal Accounting
Name
Secondary Method
AAA configuration example
Network requirements
As shown in
accounting for Telnet users.
Figure 410 Network diagram
Configuration procedure
1.
Enable the Telnet server function, and configure the switch to use AAA for Telnet users. (Details not
shown.)
2.
Configure IP addresses for the interfaces. (Details not shown.)
3.
Configure a local user:
a.
Select Device > Users from the navigation tree.
Description
Configure the accounting method and secondary accounting method for login users
by using one of the following options:
•
HWTACACS—HWTACACS accounting. You must specify the HWTACACS
scheme to be used.
•
Local—Local accounting.
•
None—No accounting.
•
RADIUS—RADIUS accounting. You must specify the RADIUS scheme to be used.
•
Not Set—The device uses the settings in the Default Accounting area for login
users.
Configure the accounting method and secondary accounting method for PPP users
by using one of the following options:
•
HWTACACS—HWTACACS accounting. You must specify the HWTACACS
scheme to be used.
•
Local—Local accounting.
•
None—No accounting.
•
RADIUS—RADIUS accounting. You must specify the RADIUS scheme to be used.
•
Not Set—The device uses the settings in the Default Accounting area for PPP
users.
Configure the accounting method for portal users by using one of the following
options:
•
Local—Local accounting.
•
None—No accounting.
•
RADIUS—RADIUS accounting. You must specify the RADIUS scheme to be used.
•
Not Set—The device uses the settings in the Default Accounting area for portal
users.
Figure
410, configure the switch to perform local authentication, authorization, and
397