HP 830 Series Configuration Manual page 342

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

Figure 328 Global 802.1X globally
5.
In the Ports With 802.1X Enabled area, click Add.
6.
Select GigabitEthernet1/0/1 from the Port list.
7.
Click Apply.
Figure 329 802.1X configuration of GigabitEthernet 1/0/1
Verifying the configuration
After the user passes authentication and is online, use the ping command to test whether ACL 3000 takes
effect.
1.
From the navigation tree, select Network > Diagnostic Tools.
The IPv4 Ping page appears.
2.
Enter the destination IP address 10.0.0.1.
3.
Click Start to start the ping operation.
330

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents