HP 830 Series Configuration Manual page 123

Figure 104 Configuring the SNMP agent
b. Select the Enable option and select the v1 and v2 options.
c. Click Apply.
2. Configure a read-only community:
a. Click the Community tab.
b. Click Add.
The page for adding an SNMP community appears.
Figure 105 Configuring an SNMP read-only community
c. Enter public in the Community Name field and select Read only from the Access Right list.
d. Click Apply.
3. Configure a read and write community:
a. Click Add on the Community tab page.
The page for adding an SNMP community appears.
111