Figure 260 Configuring a static address pool
3.
Enable the DHCP server on VLAN-interface 9 (you can skip this step because the DHCP server is
enabled on the interface by default):
a.
Click the
shown in
b.
Select the Enable option.
c.
Click Apply.
Figure 261 Enabling the DHCP server on an interface
Dynamic IP address assignment configuration example
Network requirements
•
As shown in
10.1.1.0/24, which is subnetted into 10.1.1.0/25 and 10.1.1.128/25.
The IP addresses of VLAN-interface 1 and VLAN-interface 9 on Switch A are 10.1.1.1/25 and
•
10.1.1.129/25 respectively.
In subnet 10.1.1.0/25, configure the address lease duration as ten days and twelve hours, domain
•
name suffix aabbcc.com, DNS server address 10.1.1.2/25, WINS server address 10.1.1.4/25, and
gateway address 10.1.1.126/25.
In the subnet 10.1.1.128/25, configure the address lease duration as five days, domain name suffix
•
aabbcc.com, DNS server address 10.1.1.2/25, and gateway address 10.1.1.254/25.
The domain name suffix and DNS server address on subnets 10.1.1.0/25 and 10.1.1.128/25 are the
•
same. Therefore, the domain name suffix and DNS server address need to be configured only for
icon of VLAN-interface 9 in the Interface Configuration field to enter the page as
Figure
261.
Figure
262, the DHCP server (Switch A) assigns IP addresses to clients on subnet
277