HP 830 Series Configuration Manual page 421

Figure 421 RADIUS server configuration
2. Configure RADIUS servers as described in
3. Click Apply.
Table 122 Configuration items
Item
Server Type
Primary Server IP
Primary Server UDP Port
Primary Server Status
Secondary Server IP
Secondary Server UDP Port
Table
Description
Select the type of the server to be configured: Authentication Server or
Accounting Sever.
Specify the IP address of the primary server.
If no primary server is specified, this field displays 0.0.0.0.
To remove the previously configured primary server, enter 0.0.0.0 in the box.
The specified IP address of the primary server cannot be the same as the
secondary server's IP address.
Specify the UDP port of the primary server.
If the IP address of the primary server is not specified or the specified IP address
is to be removed, the port number is 1812 for authentication or 1813 for
accounting.
Set the status of the primary server. Options are:
•
active—The server is operating correctly.
•
blocked—The server is down.
If the IP address of the primary server is not specified or the specified IP address
is to be removed, the status is blocked.
Specify the IP address of the secondary server.
If no secondary server is specified, this field displays 0.0.0.0.
To remove the previously configured secondary server, enter 0.0.0.0 in the box.
The specified IP address of the secondary server cannot be the same as the
primary server's IP address.
Specify the UDP port of the secondary server.
If the IP address of the secondary server is not specified or the specified IP
address is to be removed, the port number is 1812 for authentication or 1813
for accounting.
409
122.