Creating A Static Arp Entry; Removing Arp Entries; Configuring Gratuitous Arp - HP 830 Series Configuration Manual

Creating a static ARP entry

1. Select Network > ARP Management from the navigation tree to enter the default ARP Table page
shown in
2. Click Add.
Figure 209 Adding a static ARP entry
3. Configure the static ARP entry as described in
4. Click Apply.
Table 77 Configuration items
Item
IP Address
MAC Address
Advanced
Options

Removing ARP entries

1. Select Network > ARP Management from the navigation tree to enter the default ARP Table page
shown in
2. Remove ARP entries:
To remove specific ARP entries, select the boxes of target ARP entries, and click Del Selected.
To remove all static and dynamic ARP entries, click Delete Static and Dynamic.
To remove all static ARP entries, click Delete Static.
To remove all dynamic ARP entries, click Delete Dynamic.

Configuring gratuitous ARP

1. Select Network > ARP Management from the navigation tree.
Figure 208.
Description
Enter an IP address for the static ARP entry.
Enter a MAC address for the static ARP entry.
VLAN ID Enter a VLAN ID and specify a port for the static ARP entry.
IMPORTANT:
Port
The VLAN ID must be the ID of the VLAN that has already been created, and the port
must belong to the VLAN. The corresponding VLAN interface must have been created.
Figure 208.
Table 77.
229