Configuring An Snmp User - HP 830 Series Configuration Manual

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

The page for creating an SNMP group appears.
Figure 97 Creating an SNMP group
4.
Configure SNMP group as described in
5.
Click Apply.
Table 36 Configuration items
Item
Group Name
Security Level
Read View
Write View
Notify View
ACL

Configuring an SNMP user

1.
Select Device > SNMP from the navigation tree.
2.
Click the User tab.
The User page appears.
Description
Set the SNMP group name.
Select the security level for the SNMP group:
NoAuth/NoPriv—No authentication no privacy.
Auth/NoPriv—Authentication without privacy.
Auth/Priv—Authentication and privacy.
IMPORTANT:
For an existing SNMP group, its security level cannot be modified.
Select the read view of the SNMP group.
Select the write view of the SNMP group.
If no write view is configured, the NMS cannot perform the write operations to all MIB
objects on the device.
Select the notify view of the SNMP group. The notify view can send trap messages.
If no notify view is configured, the agent does not send traps to the NMS.
Associate a basic ACL with the group to restrict the source IP address of SNMP packets.
You can configure to allow or prohibit SNMP packets with a specific source IP address
to restrict the intercommunication between the NMS and the agent.
106
Table
36.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents