Configuring service management
1.
Select Network > Service from the navigation tree to enter the service management configuration
page, as shown in
Figure 276 Service management
2.
Enable or disable various services on the page.
items.
3.
Click Apply.
Table 96 Configuration items
Item
FTP
Telnet
SSH
SFTP
HTTP
Figure
276.
Description
Enable or disable the FTP service.
Enable FTP
service
The FTP service is disabled by default.
Associate the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
ACL
You can view this configuration item by clicking the expanding button in
front of FTP.
Enable or disable the Telnet service.
Enable Telnet
service
The Telnet service is disabled by default.
Enable or disable the SSH service.
Enable SSH
service
The SSH service is disabled by default.
Enable or disable the SFTP service.
The SFTP service is disabled by default.
Enable SFTP
service
When you enable the SFTP service, the SSH service must be enabled.
Enable or disable the HTTP service.
Enable HTTP
service
The HTTP service is enabled by default.
Table 96
IMPORTANT:
287
describes the detailed configuration