HP 830 Series Configuration Manual page 457

Poe+ unified wired-wlan switch switching engine web-based

Hide thumbs Also See for HP 830 Series:

Table of Contents

Figure 460 Adding a port isolation group

Assign GigabitEthernet 1/0/2, GigabitEthernet 1/0/3, and GigabitEthernet 1/0/4 to port

isolation group 1:

Click the Port Setup tab.

Select 1 from the Isolate group ID list.

Select Isolated port for Config Type.

Select 2, 3, 4 on the chassis front panel. 2, 3, 4 represent ports GigabitEthernet 1/0/2,

GigabitEthernet 1/0/3, and GigabitEthernet 1/0/4, respectively.

Click Apply.

A configuration progress dialog box appears.

After the configuration process is complete, click Close in the dialog box.

Show Quick Links

Table of Contents