The file upload dialog box appears.
4.
Select the .cfg file to be uploaded, and click Apply.
Saving the configuration
This module allows administrators to save the running configuration to the configuration file to be used
at the next startup.
IMPORTANT:
HP recommends that you do not perform any operation on the Web interface while the configuration is
•
being saved.
The system does not support saving the configuration of two or more consecutive users. The system
•
prompts the users to try again if one user's configuration is being saved.
You can save the configuration by using one of the following ways: fast or common.
Fast
Click the Save button at the upper right of the auxiliary area, and you can save the configuration to the
configuration file.
Figure 39 Saving the configuration in fast mode
Common
1.
Select Device > Configuration from the navigation tree.
2.
Click the Save tab.
3.
Click Save Current Settings.
Figure 40 Saving the configuration in common mode
44