HP 830 Series Configuration Manual page 180

Figure 161 MST region
2. Click Modify to enter the page for configuring MST regions.
Figure 162 Configuring an MST region
3. Configure the MST region information as described in
4. Click Activate.
Table 55 Configuration items
Item
Region Name
Revision Level
Manual (Instance ID and VLAN
ID)
Modulo
Description
MST region name.
The MST region name is the bridge MAC address of the device by default.
Revision level of the MST region.
Manually add VLAN-to-MSTI mappings. Click Apply to add the
VLAN-to-MSTI mapping entries to the list.
The device automatically maps 4094 VLANs to the corresponding MSTIs
based on the modulo value.
168
Table 55, and click Apply.