Configuring Management Ip Address - HP 830 Series Configuration Manual

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

Figure 16 System parameter configuration page
2.
Configure the parameters as described in
Table 4 Configuration items
Item
Sysname
Syslocation
Syscontact

Configuring management IP address

CAUTION:
Modifying the management IP address used for the current login terminates the connection to the device.
Use the new management IP address to re-log in to the system.
Description
Specify the system name.
The system name appears at the top of the navigation tree.
You can also set the system name in the System Name page you enter by selecting
Device > Basic. For more information, see "Configuring basic device settings."
Specify the physical location of the system.
You can also set the physical location in the setup page you enter by selecting Device >
SNMP. For more information, see "Configuring SNMP."
Set the contact information for users to get in touch with the device vendor for help.
You can also set the contact information in the setup page you enter by selecting
Device > SNMP. For more information, see "Configuring SNMP."
22
Table
4.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents