Configuring An Snmp Group - HP 830 Series Configuration Manual

Figure 95 Creating an SNMP community
4. Configure the SNMP community as described in
Click Apply.
5.
Table 35 Configuration items
Item
Community Name
Access Right
View
ACL

Configuring an SNMP group

1. Select Device > SNMP from the navigation tree.
2. Click the Group tab.
The Group page appears.
Figure 96 SNMP group
3. Click Add.
Description
Set the SNMP community name.
Configure the access rights:
•
Read only—The NMS can perform read-only operations to the MIB objects
when it uses this community name to access the agent.
•
Read and write—The NMS can perform both read and write operations to the
MIB objects when it uses this community name to access the agent.
Specify the view associated with the community to limit the MIB objects that can be
accessed by the NMS.
Associate the community with a basic ACL to allow or prohibit the access to the
agent from the NMS with the specified source IP address.
105
Table 35.