HP 830 Series Configuration Manual page 330

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

Figure 307 Configuring global 802.1X
3.
In the Ports With 802.1X Enabled area, click Add.
4.
Select GigabitEthernet1/0/1 from the Port list.
5.
Select the Enable Re-Authentication box, and click Apply.
Figure 308 802.1X configuration of GigabitEthernet 1/0/1
Configuring a RADIUS scheme
1.
From the navigation tree, select Authentication > RADIUS.
The RADIUS Server tab appears.
2.
Select Authentication Server from the Server Type list, enter 10.1.1.1 in the Primary Server IP box
and 1812 in the Primary Server UDP Port box, select active from the Primary Server Status list,
enter 10.1.1.2 in the Secondary Server IP box and 1812 in the Secondary Server UDP Port box,
select active from the Secondary Server Status list.
318

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents