HP 830 Series Configuration Manual page 336

The RADIUS Server tab appears.
2. Select Authentication Server from the Server Type list, enter 10.1.1.1 in the Primary Server IP box
and 1812 in the Primary Server UDP Port box, and select active from the Primary Server Status list.
3. Click Apply.
Figure 318 Configuring the RADIUS authentication server
4. On the RADIUS Server tab, select Accounting Server from the Server Type list, enter 10.1.1.2 in the
Primary Server IP box and 1813 in the Primary Server UDP Port box, and select active from the
Primary Server Status list.
5. Click Apply.
Figure 319 Configuring a RADIUS accounting server
6. Click the RADIUS Setup tab.
7. Select extended from the Server Type list, select the Authentication Server Shared Key and
Accounting Server Shared Key options, enter abc in the four shared key boxes, and select
without-domain from the Username Format list.
8. Click Apply.
324