HP 830 Series Configuration Manual page 445

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

Figure 444 PKI certificate retrieval page
4.
Configure the parameters, as described in
5.
Click Apply.
Table 128 Configuration items
Item
Domain Name
Certificate Type
Enable Offline Mode
Get File From Device
Get File From PC
Password
After retrieving a certificate, you can click View Cert corresponding to the certificate from the PKI
certificates list to display the contents of the certificate.
Description
Select the PKI domain for the certificate.
Select the type of the certificate to be retrieved: CA or Local.
Click this box to retrieve a certificate in offline mode (using an out-of-band means such
as FTP, disk, or email), and then import the certificate into the local PKI system.
The following configuration items are displayed if this box is selected.
Specify the path and name of the certificate file to import:
If the certificate file is saved on the device, select Get File From Device and then
specify the path and name of the file on the device. If no file is specified, the system,
by default, gets the file domain-name_ca.cer (for the CA certificate) or
domain-name_local.cer (for the local certificate) under the root directory of the
device.
If the certificate file is saved on a local PC, select Get File From PC and. then specify
the path and name of the file and specify the partition that saves the file.
Enter the password for protecting the private key, which was specified when the
certificate was exported.
433
Table
128.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents