Enabling The Dhcp Server On An Interface; Displaying Assigned Ip Addresses - HP 830 Series Configuration Manual

Item
DNS Server Address
WINS Server Address
NetBIOS Node Type

Enabling the DHCP server on an interface

1. Select Network > DHCP from the navigation tree to enter the default DHCP Server page shown
in Figure
2. In the Interface Configuration field, click the
shown in
3. Select the Enable option.
4. Click Apply.
Figure 249 Configuring a DHCP server interface

Displaying assigned IP addresses

1. Select Network > DHCP > DHCP Server from the navigation tree to enter the page, as shown
in Figure
2. In the Address In Use area, view the information about the IP addresses assigned from the address
pool.
Table 89 Field description
Field
IP Address
Client MAC Address/Client ID
Pool Name
Lease Expiration
246.
Figure 249.
246.
Description
Enter the DNS server addresses for the client.
To allow the client to access a host on the Internet via the host
name, you need to specify DNS server addresses.
Up to eight DNS servers can be specified in a DHCP address
pool, separated by commas.
Enter the WINS server addresses for the client.
If b-node is specified for the client, you do not need to specify any
WINS server address.
Up to eight WINS servers can be specified in a DHCP address
pool, separated by commas.
Select the NetBIOS node type for the client.
icon next to a specific interface to enter the page
Description
Assigned IP address.
Client MAC address or client ID bound to the IP address.
Name of the DHCP address pool where the IP address belongs.
Lease time of the IP address.
266