Static Arp Configuration Example - HP 830 Series Configuration Manual

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

2.
Click the Gratuitous ARP tab.
Figure 210 Gratuitous Configuring ARP page
3.
Configure gratuitous ARP as described in
4.
Click Apply.
Table 78 Configuration items
Item
Disable gratuitous ARP packets
learning function
Send gratuitous ARP packets when
receiving ARP requests from another
network segment

Static ARP configuration example

Network Requirements
As shown in
GigabitEthernet 1/0/1 belonging to VLAN 100.
The IP address of Router B is 192.168.1.1/24. The MAC address of Router B is 00e0-fc01-0000.
Configure static ARP entries on Switch A to improve communication security between Switch A and
Router B.
Figure 211 Network diagram
Figure 21
1, hosts are connected to Switch A, which is connected to Router B through interface
Table
78.
Description
Disable learning of ARP entries according to gratuitous ARP packets.
Enabled by default.
Enable the device to send gratuitous ARP packets upon receiving ARP
requests from another network segment.
Disabled by default.
230

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents