HP 830 Series Configuration Manual page 417

The Authenticator field (16 bytes long) is used to authenticate replies from the RADIUS server and to
•
encrypt user passwords. There are two types of authenticators: request authenticator and response
authenticator.
• The Attributes field, variable in length, carries the specific authentication, authorization, and
accounting information that defines the configuration details of the request or response. This field
may contain multiple attributes, each with three sub-fields:
Type—(1 byte long) Type of the attribute. It is in the range 1 to 255. Commonly used RADIUS
attributes are defined in RFC 2865, RFC 2866, RFC 2867, and RFC 2868.
list of the attributes.
Length—(1 byte long) Length of the attribute in bytes, including the Type, Length, and Value
sub-fields.
Value—(Up to 253 bytes) Value of the attribute. Its format and content depend on the Type and
Length sub-fields.
Table 120 Commonly used RADIUS attributes
No. Attribute
1 User-Name
2 User-Password
3 CHAP-Password
4 NAS-IP-Address
5 NAS-Port
6 Service-Type
7 Framed-Protocol
8 Framed-IP-Address
9 Framed-IP-Netmask
10 Framed-Routing
11 Filter-ID
12 Framed-MTU
13 Framed-Compression
14 Login-IP-Host
15 Login-Service
16 Login-TCP-Port
17 (unassigned)
18 Reply_Message
19 Callback-Number
20 Callback-ID
21 (unassigned)
22 Framed-Route
23 Framed-IPX-Network
24 State
No.
45
46
47
48
49
50
51
52
53
54
55
56-59
60
61
62
63
64
65
66
67
68
69
70
71
405
Table 120
Attribute
Acct-Authentic
Acct-Session-Time
Acct-Input-Packets
Acct-Output-Packets
Acct-Terminate-Cause
Acct-Multi-Session-Id
Acct-Link-Count
Acct-Input-Gigawords
Acct-Output-Gigawords
(unassigned)
Event-Timestamp
(unassigned)
CHAP-Challenge
NAS-Port-Type
Port-Limit
Login-LAT-Port
Tunnel-Type
Tunnel-Medium-Type
Tunnel-Client-Endpoint
Tunnel-Server-Endpoint
Acct-Tunnel-Connection
Tunnel-Password
ARAP-Password
ARAP-Features
shows a