Configuration procedure
1.
Add Ethernet ports to related VLANs and assign IP addresses to the VLAN interfaces. (Details not
shown.)
2.
Configure the RADIUS authentication server:
a.
Select Authentication > RADIUS from the navigation tree.
The RADIUS server configuration page appears, as shown in
b.
Select Authentication Server as the server type, enter the IP address 1.1.1.2 and port number
1812, select active from the Primary Server Status list, and click Apply.
Figure 373 Configuring the RADIUS authentication server
3.
Configure a RADIUS accounting server:
On the RADIUS server configuration page, select Accounting Server as the server type, and enter
the IP address 1.1.1.2 and port number 1813, select active from the Primary Server Status list, and
click Apply.
Figure 374 Configuring a RADIUS accounting server
4.
Configure RADIUS scheme system for information exchanges between the device and the RADIUS
servers:
368
Figure
373.