Configuration Prerequisites; Configuration Procedure; Configuring Mac Authentication Globally - HP 830 Series Configuration Manual

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

A hybrid port is always assigned to an Auth-Fail VLAN as an untagged member. After the assignment,
do not reconfigure the port as a tagged member in the VLAN.

Configuration prerequisites

Before you configure MAC authentication, complete the following tasks:
Disable port security globally.
Create and configure an ISP domain.
For local authentication, create local user accounts and specify the LAN access service for the
accounts.
For remote authentication, check that the device and the RADIUS server can reach each other and
create user accounts on the server.
If you are using MAC-based accounts, make sure that the username and password for each account is
the same as the MAC address of the MAC authentication users.

Configuration procedure

Step
1.

Configuring MAC authentication globally

2.
Configuring MAC authentication on a port
Configuring MAC authentication globally
1.
From the navigation tree, select Authentication > MAC Authentication.
2.
In the MAC Authentication Configuration area, click Advanced.
Remarks
Required.
Enable MAC authentication globally and configure the
advanced parameters.
By default, MAC authentication is disabled globally.
Required.
Enable MAC authentication on a port.
MAC authentication can take effect on a port only when it is
enabled globally and on the port. You can also configure
MAC authentication on a port before you globally enable
MAC authentication.
By default, MAC authentication is disabled on a port.
295

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents