HP 830 Series Configuration Manual page 290

subnet 10.1.1.0/24. Subnet 10.1.1.0/25 and 10.1.1.128/25 can inherit the configuration of subnet
10.1.1.0/24.
HP recommends that you configure up to 122 clients to obtain IP addresses from VLAN-interface 1 and
up to 124 clients to obtain IP addresses from VLAN-interface 9.
Figure 262 Network diagram
10.1.1.126/25
Gateway A
DNS server
Configuring Switch A
1. Enable DHCP:
a. Select Network > DHCP > DHCP Server from the navigation tree to enter the DHCP Server
page.
b. Select the Enable option in the DHCP Service field.
Figure 263 Enabling DHCP
2. Configure the dynamic DHCP address named pool0:
Client WINS server
10.1.1.4/25
Vlan-int1
10.1.1.1/25
10.1.1.2/25
Vlan-int2
Switch B
Client
Client
Vlan-int9
10.1.1.129/25
Switch A
DHCP server
Client
278
Client
10.1.1.254/25
Gateway B
Client