Igmp Snooping Configuration Example - HP 830 Series Configuration Manual

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

Figure 222 Displaying entry information
3.
To display detailed information of an entry, click the
Figure 223 Information about an IGMP snooping multicast entry
Table 82 Field description
Field
VLAN ID
Source Address
Group Address
Router Port(s)
Member Port(s)

IGMP snooping configuration example

Network requirements
IGMPv2 runs on Router A and IGMPv2 snooping runs on Switch A. Router A acts as the IGMP querier.
Perform the configuration so Host A can receive the multicast data addressed to the multicast group
224.1.1.1, and Switch A drops unknown multicast data instead of flooding it in the VLAN. Enable fast
leave on GigabitEthernet 1/0/3 of Switch A to save bandwidth and resources.
Description
ID of the VLAN to which the entry belongs.
Multicast source address, where "0.0.0.0" indicates all multicast sources.
Multicast group address.
All router ports.
All member ports.
244
icon corresponding to the entry.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents