Figure 495 Configuring rate limit on a port
3.
Configure rate limit on a port as described in
4.
Click Apply.
Table 158 Configuration items
Item
Please select an interface type
Rate Limit
Direction
CIR
CBS
EBS
Table
Description
Select the types of interfaces to be configured with rate limit.
Enable or disable rate limit on the specified port.
Select a direction to which the rate limit is to be applied.
•
Inbound—Limits the rate of packets received on the specified port.
•
Outbound—Limits the rate of packets sent by the specified port.
•
Both—Limits the rate of packets received on the specified port and packets
sent by the specified port.
Set the committed information rate (CIR), which is the average traffic rate.
Set the committed burst size (CBS), which is the number of bits that can be sent
in each interval.
Set the excess burst size (EBS).
EBS is available when the CBS box is selected.
492
158.