Configuring Mac Authentication; Overview; User Account Policies; Authentication Procedures - HP 830 Series Configuration Manual

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

Configuring MAC authentication

Overview

MAC authentication controls network access by authenticating source MAC addresses on a port. It does
not require client software. A user is not required to enter a username and password for network access.
The device initiates a MAC authentication process when it detects an unknown source MAC address on
a MAC authentication enabled port. If the MAC address passes authentication, the user can access
authorized network resources. If the authentication fails, the device considers the MAC address to be a
silent MAC address, drops the packet, and starts a quiet timer. The device drops all subsequent packets
from the MAC address within the quiet time. This quiet mechanism avoids repeated authentication during
a short time.
If the MAC address that has failed authentication is a static MAC address or a MAC address that has
passed any security authentication, the device does not consider it to be a silent address.

User account policies

MAC authentication supports the following user account policies:
One MAC-based user account for each user—The access device uses the source MAC addresses in
packets as the usernames and passwords of users for MAC authentication. This policy is suitable for
an insecure environment.
One shared user account for all users—A single username and password are used for all MAC
authentication users on the access device. The username and password are not required to be a
MAC address. This policy is suitable for a secure environment.

Authentication procedures

You can perform MAC authentication on the access device (local authentication) or through a RADIUS
server.
For example, a source MAC unknown packet arrives at a MAC authentication enabled port.
In the local authentication approach:
If MAC-based accounts are used, the access device uses the source MAC address of the packet as
the username and password to search its local account database for a match.
If a shared account is used, the access device uses the shared account username and password to
search its local account database for a match.
In the RADIUS authentication approach:
If MAC-based accounts are used, the access device sends the source MAC address as the
username and password to the RADIUS server for authentication.
If a shared account is used, the access device sends the shared account username and password
to the RADIUS server for authentication.
293

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents