Configuring And Displaying Clients' Ip-To-Mac Bindings - HP 830 Series Configuration Manual

Configuring and displaying clients' IP-to-MAC bindings

1. Select Network > DHCP from the navigation tree and click DHCP Relay.
2. In the User Information field, click User Information to view static and dynamic bindings, as shown
in Figure
Figure 253 Displaying clients' IP-to-MAC bindings
3. Click Add to enter the page as shown in
Figure 254 Creating a static IP-to-MAC binding
4. Configure the static IP-to-MAC binding as described in
5. Click Apply.
Table 93 Configuration items
Item
IP Address
MAC Address
Interface Name
253.
Description
Enter the IP address of a DHCP client.
Enter the MAC address of the DHCP client.
Select the Layer 3 interface connected with the DHCP client.
IMPORTANT:
The interface of a static binding entry must be configured as a DHCP relay agent.
Otherwise, address entry conflicts may occur.
Figure 254.
Table
271
93.