Figure 508 Adding a policy
9.
Configure classifier-behavior associations for the policy:
a.
Click the Setup tab.
b.
Select policy1.
c.
Select class1 from the Classifier Name list.
d.
Select behavior1 from the Behavior Name list.
e.
Click Apply.
Figure 509 Configuring classifier-behavior associations for the policy
10.
Apply the QoS policy in the inbound direction of interface GigabitEthernet 1/0/1:
a.
Select QoS > Port Policy from the navigation tree.
b.
Click the Setup tab.
c.
Select policy1 from the Please select a policy list.
d.
Select Inbound from the Direction list.
504