Displaying And Maintaining An Irf Fabric; Configuration Examples; Lacp Mad-Enabled Irf Configuration Example - HP FlexFabric 5700 series Configuration Manual

After the IRF fabric is recovered, all ports that have been shut down by MAD come up automatically.

Displaying and maintaining an IRF fabric

Execute display commands in any view.
Task
Display information about all IRF
members.
Display the IRF fabric topology.
Display IRF link information.
Display IRF configuration.
Display the load sharing mode for
IRF links.
Display MAD configuration.

Configuration examples

This section provides IRF configuration examples for IRF fabrics that use different MAD mechanisms.

LACP MAD-enabled IRF configuration example

Network requirements
As shown in
Configure LACP MAD on the multichassis aggregation to Device E, an HP device that supports extended
LACP.
Figure 13, set up a four-chassis IRF fabric at the access layer of the enterprise network.
Command
display irf
display irf topology
display irf link
display irf configuration
display irf-port load-sharing mode [ irf-port [ member-id/port-number ] ]
display mad [ verbose ]
29