Configuring Mac Authentication On A Port - HP 830 Series Configuration Manual

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

Item
Authentication Information Format

Configuring MAC authentication on a port

1.
From the navigation tree, select Authentication > MAC Authentication.
2.
In the Ports With MAC Authentication Enabled area, click Add.
Figure 282 Configuring MAC authentication on a port
3.
Configure MAC authentication for a port as described in
4.
Click Apply.
Table 98 Configuration items
Item
Port
Enable MAC VLAN
Auth-Fail VLAN
Description
Configure the properties of MAC authentication user accounts.
MAC without hyphen—Uses MAC-based accounts, and excludes
hyphens from the MAC address, for example, XXXXXXXXXXXX.
MAC with hyphen—Uses MAC-based accounts, and hyphenates
the MAC address, for example, XX-XX-XX-XX-XX-XX.
Fixed—Uses a shared account. You must specify a username and
password for the account.
Description
Select a port on which you want to enable MAC authentication.
Select the box to enable MAC-based VLAN on the port.
IMPORTANT:
You can enable MAC authentication only on hybrid ports.
Specify an existing VLAN as the MAC authentication Auth-Fail VLAN.
IMPORTANT:
The MAC authentication Auth-Fail VLAN function has higher priority than
the quiet function of MAC authentication.
The MAC authentication Auth-Fail VLAN function has higher priority than
the block MAC action but lower priority than the shut down port action of
the port intrusion protection feature. For more information about port
intrusion protection, see
297
Table
98.
"Configuring port
security."

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents