Setting Lacp Priority - HP 830 Series Configuration Manual

Table 62 Field description
Field
Aggregation interface
Link Type
Partner ID
Selected Ports
Standby Ports
Member Port
State
Reason for being Unselected

Setting LACP priority

1. Select Network > LACP from the navigation tree.
2. Click Setup.
Figure 173 The Setup tab
Description
Type and ID of the aggregate interface.
Bridge-Aggregation indicates a Layer 2 aggregate interface.
Type of the aggregate interface, which can be static or dynamic.
ID of the remote device, including its LACP priority and MAC address.
Number of Selected ports in each link aggregation group (Only Selected ports
can transmit and receive user data).
Number of Unselected ports in each link aggregation group (Unselected ports
cannot transmit or receive user data).
A member port of the link aggregation group corresponding to the selected
aggregate interface.
Select state of a member port: Selected or Unselected.
Reason why the state of a member port is Unselected. For a selected member
port, this field is displayed as a hyphen (-).
187