HP 830 Series Configuration Manual page 213

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

Figure 182 Modifying LLDP settings on a port
3.
Modify the LLDP parameters for the port as described in
4.
Click Apply.
A progress dialog box appears.
5.
Click Close on the progress dialog box when the progress dialog box prompts that the
configuration succeeds.
Table 72 Configuration items
Item
Interface Name
DLDP State
Basic
LLDP Operating Mode
Settings
Description
Displays the name of the port or ports you are configuring.
Displays the LLDP enabling status on the port you are configuring.
This field is not available when you batch-configure ports.
Set the LLDP operating mode on the port or ports you are configuring:
TxRx—Sends and receives LLDPDUs.
Tx—Sends but does not receive LLDPDUs.
Rx—Receives but not does not send LLDPDUs.
Disable—Neither sends nor receives LLDPDUs.
201
Table
72.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents