Customizing Settings; Changing Standard Copy Settings - Oce 3165 Operator's Manual

Customizing settings

At delivery of an Océ 3165, the Océ service technician changes copy settings
based on your company's or department's requirements. However, as time
goes by you may want to adapt them to recent working procedures.
Please note that for printing the standard settings are the ones selected for the
job in the driver.

Changing standard copy settings

After warming-up or after pressing the correction button twice, all functions
are in 'standard' or 'default' setting. Initially, default settings have been
defined by Océ and are therefore called factory settings. For example, the
factory setting of the 'Copy' function is default set for '2-sided' to comply
with the EPA Energy Star criteria (see page 74). A list of these default factory
settings is included in appendix A of the User Manual.
You can adapt these default settings to meet company- or department-specific
requirements. By doing so, the settings which users need for most of their jobs
are already selected and only need to be changed for specific jobs. These are
called company settings.
You can change the company settings back to the factory settings at any time.
Defining company settings
Press the correction button twice to clear any remaining settings and select the
1
required standard settings.
Start a copy job to check for any conflicting settings.
2
Access the key operator system (see page 13).
3
Open the 'Machine' section and select the 'Defaults' settings.
4
18 Océ 3165 Key Operator Manual