Setting Recurring Daylight Saving Time - Dell PowerEdge M IO Aggregator Command Reference Manual

Setting Recurring Daylight Saving Time

Set a date (and time zone) on which to convert the switch to daylight savings time on a specific day every
year.
If you have already set daylight savings for a one-time setting, you can set that date and time as the
recurring setting using the
To set a recurring daylight saving time, use the following command:
Command Syntax
clock summer-time time-zone
recurring start-week start-day
start-month start-time end-week
end-day end-month end-time [offset]
clock summer-time time-zone recurring
Command Mode
CONFIGURATION
command.
Purpose
Set the clock to the appropriate timezone and adjust to
daylight savings time every year.
• time-zone: Enter the three-letter name for the time
zone. This name is displayed in the show clock
output.
• start-week: (OPTIONAL) Enter one of the following
as the week that daylight savings begins and then
enter values for
start-day
• Enter a number from 1-4 as the
week-number:
number of the week in the month to start daylight
savings time.
• Enter this keyword to start daylight savings time
first:
in the first week of the month.
• Enter this keyword to start daylight savings time
last:
in the last week of the month.
• Enter the name of one of the 12 months
start-month:
in English. You can enter the name of a day to change
the order of the display to
• Enter the number of the day. Range: 1 to
start-day:
31. You can enter the name of the month to change
the order of the display to
• start-year: Enter a four-digit number as the year.
Range: 1993 to 2035
• Enter the time in hours:minutes. For the
start-time:
hour variable, use the 24-hour format, example, 17:15
is 5:15 pm.
through
end-time:
time day month year.
time day month year.
System Time and Date | 229