The Film Panel; Post Panel Interface - Euphonix System 5 Operation Manual

System 5 Digital Audio Mixing System Operation Manual
15.2

The Film Panel

Link allows the user
to select which bus
sections/legs are
under the control of
the master.
M S T R D i a
Solo Solo
ON ON
Ready Ready
Ready switch enables
Record On for selected
bus(es). Solo and On
switches for monitor inputs
assigned to selected paddle
The Film Panel is divided into two distinct parts: the traditional PEC/DIR panel on the
left, and an additional utility panel to the right. The right panel duplicates most of the
CM401's monitoring and setup functions.
Ext/Rec switch
enables external GPI
to trigger record.
M u s F X
Solo Solo Solo Solo
ON ON ON ON
Ready Ready Ready Ready
8 plus master RECORD
ON/OFF and BUS/PB
(playback) paddles.
Figure 15-1 Post Panel Interface
Sum switch is reserved for future
use. Solo switch lights when a
monitor matrix solo is active and
hitting the switch clears all solos.
Main Alt 1
Solo Solo Solo
Spkrs
Spkrs
Monitor Alt 2
ON ON ON
Insert Spkrs
Ready Ready Dim Cut
Ready
Rec's
Ext's
Panel Spkr
Lock Asgn
Solo Fold
Ctrl Down
At the top level the
displays represent the
section currently assigned
to the corresponding
paddles and switches.
210
CM403 Film/Post Module
Allows paging for more
than 8 sections (or busses-
if the section is expanded).
D i a
M u s
F X
Talk
A single section can be
expanded on to the
switches and paddles by
hitting the corresponding
Exp/Sel switch.