Knobset Control Panel; Center Panel Knobset Presets - Euphonix System 5 Operation Manual

System 5 Digital Audio Mixing System Operation Manual
Aux
cfg
Slct / P unch
Dyn
The Knob Values key toggles between showing the parameter name in each knob's
LCD display (unlit) and the parameter value (lit). The LCD always displays the value
when the knob is adjusted but reverts to the name unless Knob Values is lit.
The five Preset keys configure the two panels of eight knobs above the Knobset
Control Panel. The current preset key remains lit and the top two (right and left)
LCD displays show the selected functions. The bottom two LCD displays are fixed
at Dynamics and EQ.
The Slct/Punch switch punches the knobset in during automation or selects it for inclusion
in a Snapshot. The In key switches the function In (lit) and Out (unlit). The switch to
the right of the In key is the Select/Punch for the In key.
All knobset functions and displays are discussed in Section 8.4 - Channel Processing
Functions.
NOTE: The Store P and Assign Knobs switches are not currently operational.
KnobValues
12:Guit
in
P1 P2 P3
in
Figure 6-4 Knobset Control Panel
Table 6-1 Center Panel Knobset Presets
Preset # Left
1 Aux
2 Aux
3 Input
4 Aux
5 Input
Assign Knobs
P4 P5 Store P Slct / P unch
Right
Filters
Input
Filters
Aux
Input
85
CM402 Center Section
Filt
in
cfg
EQ
in