Knobset Panels; Center Panel Knobsets - Euphonix System 5 Operation Manual

System 5 Digital Audio Mixing System Operation Manual
6.2

Knobset Panels

P an 3
1/2 4
Aux
cfg
Slct / P unch
Dyn
xKne xHld
xAtk xR el
xR at xThr
The Center Section's knobsets extend access to the Center Strip's functions. The two
panels of 16 (4x4) knobs above the Channel Select Panel are dedicated to dynamics
(left) and EQ (right). The two panels of 8 (2x4) knobs above the Knobset Control Panel
display different combinations of Aux, Input, and Filters depending on the preset se-
lected from the Knobset Control Panel.
6.2.1 Knobset Control Panel
The Knobset Control Panel configures the knobs above the panel and which pages
of Dynamics and EQ appear below it. The Input and Aux functions have configu-
ration pages which can be accessed by pressing both cfg
(see Section 8.4 - Channel Processing Functions for details about the configuration
pages). The LCD display in the center of the panel shows the current Center Strip channel.
5 P an
6 7/8
KnobValues
12:Guit
in
P1 P2 P3
in
cKne cGMU
cAtk cRel
cRat cThr
Figure 6-3 Center Panel knobsets
84
F1tp F1fr F2tp
AssignKnobs
Filt
P4 P5 Stor e P Slct / P unch
EQ
LoQ LmQ HmQ
LoF LmF HmF
LoG LmG HmG
CM402 Center Section
F2fr
in
cfg
in
HiQ
HiF
HiG
keys simultaneously