Pan; Pan Knobsets - Euphonix System 5 Operation Manual

System 5 Digital Audio Mixing System Operation Manual
8.4.5

Pan

System 5 is not limited to a single pan format and one pan control per channel imposed
by the traditional analog console. System 5 allows the following pan formats (also
called pan laws): mono, stereo, LCR, LCRS, 5.1, 6.1, and 7.1.
A single panner can control several different Mix or Group busses at once, each with dif-
ferent formats. See Section 7.3 - Mix and Group Bus Setup to learn how to assign Mix
and Group Bus formats.

Pan Knobsets

Press the Pan function key to assign the Pan parameters to the knobset (Figure 8-16).
See Section 8.5.1 - Group Bus Routing and/or Section 8.5.2 - Mix Bus Routing to review
how to use the Pan to: switch to insert Pan.
Pan (page 1)
Rot8
on/off
FocF
on/off
DivF
on/off
NonB
in/out
Boom
in/out
PanR
in/out
Srnd
in/out
PanF
Width
in/out
cfg
Rotate
Focus front
Divergence front
non-Boom level
Boom level
in/out
Pan rear
in/out
Front:Surround Pan
in/out
Pan front
in/out
Page keys display
other Pan pages
Figure 8-16 Pan Knobsets
123
Channels and Strips
Pan (page 2)
DivS
Divergence Surround
FocS
Focus Surround
DivR
Divergence Rear
FocR
Focus Rear
cfg