Channel Process Order And Patch Points; Channel Processor Order And Patch Points - Euphonix System 5 Operation Manual

System 5 Digital Audio Mixing System Operation Manual
8.3

Channel Process Order and Patch Points

The seven process functions can be placed in any order to suit different applications.
The default order is Delay, Metering, Insert, EQ, Filters, Dynamics, and Fader. The
nine patch points are A Input, B Input, Insert Send/Return, Pre-fader Output, Post-fader
Direct Output, Dynamics Key Input, and Dynamics Side-Chain Link In/Out (see Figure
8-8). All patching can be done from PatchNet (see Chapter 4: eMix Application). The
A, B, and Key channel inputs can be assigned from the Strip.
A B
Channel Inputs
Trim & Phase
Input Select
Any
Order
Function
Delay
2 of 8
1 of 7
Function
Function
Meter
2 of 7
Function
Insert
3 of 7
Function
EQ
4 of 7
Function
Filters
5 of 7
Function
DYN
6 of 7
Function
7 of 7
Fader
& Mute
Solo
PF L/AFL
Aux
Sends
Grp
Pan/Route
Mix
Pan/Route
Figure 8-8 Channel processor order and patch points
.
Key
Link
Pre-Fader
Output
Post-Fader
Direct Output
108
Channels and Strips