System 5 Digital Audio Mixing System Operation Manual
Assign Channel to Console
1. Select Channels from the Main Panel Viewer.
2.
Select Auto then Channel 3.
3. Press the Chan Sel key on a Strip.
4. Press the Inpt button on the strip, then turn the Inpt knob clockwise until the
B input is selected.
5.
Press the
Back to PatchNet
1.
In PatchNet, select Console I/O.
2. Select the B Input of Channel 3.
3. Select Device Outputs.
4. Select Mic-Line 1, Ch 1, and name the channel.
5. Click Patch.
The knobs on Channel 3 now display HiZ, 48V, HPF, Gain.
button to display the B input page on the knobset.
Figure 3-4 Microphone assignment in Device Outputs
30
Quickstart to Common Tasks