Spill Area - Euphonix System 5 Operation Manual

System 5 Digital Audio Mixing System Operation Manual
2. Select the channels to include in the master channel by left-clicking and dragging
across the desired channels.
The selected channels are now highlighted.
3. Right-click on any highlighted channel to select their channel format.
To group discontinuous channels into a multi-format master, right-click each
channel and select the same format.
In PatchNet, the dynamics automatically link stereo, LCRS, 5.1, 6.1, or 7.1 channels.
Place the master on a channel strip like a normal channel:
1. Press the Masters key from the Main Panel.
2. Select a master channel and assign it to a Strip.
All Multi Format channels have a pan width control activated by the upper switch to the
left of the PanF knob. Multi Format masters can be automated just like a mono channel.
10.3

Spill Area

The Spill function temporarily assigns the slaves channels of a Control Group or Multi
Format Master to predefined Strips. See also Spill Select on page 102 for details.
1. Press the Strips key in the Main Panel.
2. Press the Spill Select key in the Strips Panel.
3. Press the Wave key on each Strip to include in the Spill area.
4. Press the Chan Select key on a master to spill its slaves into the selected Spill
area.
5. To unspill the slave channels from the Spill area and restore the Strip's previous
channels, press any master or slave Chan Select key.
Control Groups and Multi Format Masters
137