Toggle Stereo; Set Unity - Euphonix System 5 Operation Manual

System 5 Digital Audio Mixing System Operation Manual

Toggle Stereo

Pairs of Aux busses can be set to stereo or toggled back to mono from this panel.
1. Press the Stereo button.
2. Press an odd numbered Aux bus knob followed by an even numbered Aux bus
knob to toggle both between mono and stereo.
3. When finished, toggle additional odd/even numbered pairs or select a different
Aux function.
This effects all channels including those not on the surface.
Toggle On/Off
Selected Aux busses can now be toggled on/off from this panel.
1. Press the On/Off button.
2. Press the desired Aux bus knob(s).
3. When finished, select a different Aux function.
This effects only those channels on the surface.
Toggle Pre/Post
Selected Aux sends can be toggled pre-/post-fader from this panel.
1. Press the Pre/Post button.
2. Press the desired Aux bus knob(s).
3. When finished, select a different Aux function.
This effects only those channels on the surface.

Set Unity

Selected Aux busses can be set to unity from this panel.
1. Press the Unity button.
2. Press the Aux bus knob(s) to set to unity.
3. When finished, select a different Aux function.
This effects only those channels on the surface.
92
Busses and Bus Masters