Automation Leds; Select/Punch Keys; Knob (Top) And Fader (Bottom) Automation And Control Features - Euphonix System 5 Operation Manual

System 5 Digital Audio Mixing System Operation Manual
14.2.1

Automation LEDs

Figure 14-2 shows the fader, switch, and knob automation interfaces. Each automated
parameter has two status LEDs:
• The red LED (right) indicates the parameter is in Write mode.
• The green LED (left) indicates the parameter is in Read mode.
Channel Select key
All Funcs key
Channel On
Automation status LEDs
Channel On
Select/Punch key
Fader Automation
Status LEDs
Fader Select/Punch key
Strip Lock LED
Wave key
Figure 14-2 Knob (top) and fader (bottom) automation and control features
14.2.2

Select/Punch Keys

Select/Punch keys perform two functions:
• Punch the control into and out of recording automation.
• Assign the selected automation mode to its corresponding parameter.
Top of Strip
HiF
Select/Punch
for On/Off
switch
On/Off
switch
Chan
Select
All
knobs
M S L
12
6
0
6
175
Knobset
Select/Punch switch
Knob Automation
status LEDs
Knob Select/Punch
switch
Switch Automation
status LEDs
Swap channel key
swap
C25
C1
Solo key
Solo
Channel On key
on
Auto-glide LED
Fader touch-
sensor LED
Touch-sensitive
fader
Dynamic Automation