System 5 Startup Sequence - Euphonix System 5 Operation Manual

System 5 Digital Audio Mixing System Operation Manual
1.3

System 5 Startup Sequence

With all system components turned off:
1. Turn on the SC261 System Computer, the SH612 Studio Hub(s), all I/O units,
the MIDI Interface, the TT007 and the GP132.
2. At the Windows Login Screen press Ctrl + Alt + Delete and click OK or press
Enter.
There is no Administrator password.
3. The System Computer will finish booting to the Windows desktop.
With the system computer booted and the SH612 Studio Hub(s), all I/O units, the MIDI
Interface, the TT007, and the GP132 turned on:
1. Double-click the eMix icon on the desktop.
2. Turn on all of the Surface Modules, the PC253i Interface Pilot, all PC253d dig-
ital Pilots and the DF64s.
3. If the modules on the system have previously been saved as default, eMix will
continue to boot when all modules reach 100%.
4. If modules appear as Unexpected, the user can select all of the modules by
holding down the Ctrl key and clicking each of them. When all modules are
selected, click Save selected as default, and confirm the selection by clicking
OK.
5. Click Continue to finish booting eMix.
24
Introduction