status of, has been deleted, and then resolve the path error. For details, see
Deleting an LU Dynamically on page
set (Sets Up the Operating Environment)
The dlnkmgr command's set operation sets the HDLM operating
environment.
Format
To Set Up the HDLM Operating Environment
dlnkmgr set {-lb {on [-lbtype {rr|exrr|lio|exlio|lbk|exlbk}]|off}
|-ellv error-log-collection-level
|-elfs error-log-file-size
|-elfn number-of-error-log-files
|-systflv trace-level
|-systfs trace-file-size
|-systfn number-of-trace-files
|-pchk{on[-intvl check-interval]|off}
|-afb {on [-intvl check-interval]|off}}
|-iem {on [-intvl error-monitoring-interval]
[-iemnum number-of-times-error-is-to-occur] | off }
|-lic
|-rmlu {on [-force ]|off}}
|-audlog {on [-audlv audit-log-data-collection-level] [-
category [[ss][a][ca]|all]]|off}
[-s]
To Display the Format of the Set Operation
dlnkmgr set -help
Parameters
To Set Up the HDLM Operating Environment
Table 6-2 Default and Recommended Values on page 6-15
defaults and recommended values for each setting. If you change the value
of the set operation, the new value takes effect immediately.
Item name
Load balancing
Table 6-2 Default and Recommended Values
Default value
on
Command Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
4-19.
Recommended value
on
shows the
6-15