Continuous Scan - Kyocera TASKalfa 420i Operation Manual

Continuous Scan

When a large number of originals cannot be placed in the document processor at one time, the originals can be
scanned in separate batches and then copied as one job. With this function, originals are scanned until you
press [Scan Finish].
Any of the following settings can be changed during scanning.
• Original size selection
• Original orientation
• Image quality selection
• Type of original (2-sided/book original)
If you use Job Build, you can insert a blank paper during scanning or a blank page during duplex copying.
The procedure for making copies using Continuous Scan is explained below.
Ready to copy.

Continuous Scan

Off
On
Place original.
Job Build
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
Scan next original(s).
Place the originals and press Start key.
Press [Finish Scan] to start copying.
Job No.: 000021 Job Name: doc20080505113414
Scanner Setting
Original Original Original
Size Orientation Image
2-sided/Book Zoom Border Erase
Original
Density
1/2
Status
OPERATION GUIDE
Copies
Select desired binding orientation.
Binding Binding Binding
Left Right Top
Cancel OK
08/08/2009 10:10
Copies
User Name: -----
Finishing
pages
Next Copy: On Front
Next Copy:
On Back
Sheet
Insertion
Cancel Finish Scan
08/08/2009 10:10
• Zoom
• Border erase
• Density
• Color Selection
1
Press the Copy key.
2
Press [Advanced Setup] and then [Continuous
Scan].
3
If Continuous Scan is selected, press [On].
If Job Build is selected, press [Job Build] and select
desired binding orientation.
4
Press [OK].
5
Place the originals in the document processor or on
the platen and press the Start key.
If [Job Build] is selected, the next page can be
changed. Press [Sheet Insertion] to insert a blank
paper. Press [Next Copy: On Back] in duplex
copying to print the next page on back page.
6
Place the next original and press the Start key.
Repeat these steps to scan the remaining originals.
After scanning all originals, press [Finish Scan] to
start copying.
Copying Functions
4
4-31