Kyocera TASKalfa 420i Operation Manual page 97

Ready to send.
Place original.
Destination
ABCD abcd@efg.com
TUVW 10.200.188.120
Group1 Group1
On Hook Direct Chain Detail/Edit
0001 0002 0003
AAA BBB CCC DDD
0006 0007 0008
FFF GGG HHH III
Destination Quick Setup Original/Sending
Data Format
Status
Send to Folder (SMB)/Send to Folder (FTP)
Stores a scanned original image file in the specified shared folder of any PC.
Stores a scanned original image in a folder of an FTP server.
NOTE:
• Refer to Help of your operating system for details on how to share a folder.
• Be sure that SMB Protocol or FTP in the COMMAND CENTER is On. For details, refer to the KYOCERA
COMMAND CENTER Operation Guide.
OPERATION GUIDE
Destination
Detail
Address
Book
To:
E-mail
Auto
1/1
Addr Entry
Folder Path
Entry
Delete Recall
FAX No.
Entry
0004 0005 No.
EEE i-FAX
Addr Entry
0009 0010 1/100
WSD Scan
JJJ
Color/ Advanced
Image Quality Setup
08/08/2009 10:10
6
Check the destination list.
Select a destination and press [Detail/Edit] to check
and edit it.
Select a destination and press [Delete] to remove
the destination from the list.
NOTE:
When selecting [On] for Entry Check for New
Destination (page 8-31), the confirmation screen
appears. Enter the same destination again and press
[OK].
When selecting [On] for Destination Check before Send
(page 8-30), the confirmation screen appears after
pressing the Start key. For details, refer to Confirmation
Screen of Destinations on page 3-29.
1
Press the Send key.
Displays the screen for sending.
NOTE:
Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
2
Press [Folder Path Entry] and then [SMB] or [FTP].
NOTE:
Destination can be specified using the
Address Book or the One Touch Keys. For details, refer
to Specifying Destination on page 3-30.
Basic Operation
3
3-25