File Format - Kyocera TASKalfa 420i Operation Manual

Sending Functions
Ready to send.
Place original.
Original Orientation
Select the orientation of the
original document's top edge.
Place original.
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status

File Format

Select the file format of the image to send.
The table below lists the file formats and their details.

File Format

PDF
TIFF
JPEG
XPS
High Comp.
PDF
NOTE:
In the color mode, when auto color (color/black and white) is selected, [JPEG] and [XPS] cannot be
specified, and when black and white is selected, [JPEG], [High Comp. PDF], and [XPS] cannot be specified.
When [High Comp. PDF] is specified, you cannot adjust the image quality. In addition, when previewing the color
of the image by selecting [High Comp. PDF], it may differ from the actual color.
You can use PDF encryption functions. For details, refer to the following PDF Encryption Functions.
5-12
Destination
Top Edge Top Top Edge Left
Cancel OK
08/08/2009
Adjustable range of image
quality
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Compression Ratio Priority
to 3 Quality Priority
4
Select original orientation from [Top Edge Top] and
[Top Edge Left].
5
Press [OK].
10:10
6
Specify the destination, and press the Start key to
start sending.
Auto Color (Color/Grayscale), Auto
Color (Color/Black and White), Full
Color, Grayscale, Black and White
Auto Color (Color/Grayscale), Auto
Color (Color/Black and White), Full
Color, Grayscale, Black and White
Auto Color (Color/Grayscale), Full
Color, Grayscale
Auto Color (Color/Grayscale), Full
Color, Grayscale
Auto Color (Color/Grayscale), Auto
Color (Color/Black and White), Full
Color, Grayscale
Color mode
OPERATION GUIDE