Kyocera TASKalfa 420i Operation Manual page 402

Some label paper has large margins on the top sheet. When using such paper, do not peel these margins from
the carrier sheet before completing output.
Use label paper that conforms to the following specifications.
Top sheet weight
Basis weight
(overall paper weight)
Top sheet thickness
Overall paper thickness
Moisture content
Colored Paper
Colored paper must conform to the specifications listed on the page 2 of the Appendix. In addition, the pigments
in the paper must be able to withstand the heat of printing (up to 200°C or 392°F).
Preprinted Paper
Preprinted paper must conform to the specifications listed on the page 2 of the Appendix. The colored ink must
be able to withstand the heat of printing. It must be resistant to silicone oil as well. Do not use paper with a
treated surface such as glossy paper used for calendars.
Recycled Paper
Recycled paper must conform to the specifications listed on the page 2 of the Appendix; however, its whiteness
may be considered separately.
NOTE:
Before purchasing recycled paper in volume, try testing a sample to ensure that the print quality.
Appendix-20
Allowed
Item
Not allowed
Top sheet
Carrier sheet
Specifications
44 to 74 g/m²
104 to 151 g/m²
0.086 to 0.107 mm
0.115 to 0.145 mm
4 to 6 % (composite)
OPERATION GUIDE