Kyocera TASKalfa 420i Operation Manual page 256

Default Setting (System Menu)
Use the procedure below to set the default Repeat Copy setting.
1
Press the System Menu key.
2
Press [Common Settings], [
Copy.
3
Select the default for [Off] or [On].
4
Press [OK].
Collate/Offset
Set the defaults for Collate/Offset. The table below shows the available settings.
Item
Collate Off
On
Offset Off
Each Set
(Each Page)
NOTE:
Refer to page 3-13 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the defaults for Collate and Offset respectively.
4
Press [OK].
JPEG/TIFF Print
Select the image size (resolution) when printing JPEG or TIFF file. The table below shows the available settings.
Item
Fit to Paper Size
Image Resolution
Fit to Print Resolution
8-24
] and [Next] of Function Defaults. Press [
Collate not performed.
Collate performed.
Offset not performed.
Offset performed. (If [Off] is selected of Collate, it is
performed [Each Page].)
], [Next] of Function Defaults. Press [
Fit the image size to the selected paper size.
Print at resolution of the actual image.
Fit the image size to the print resolution.
] twice and [Change] of Repeat
Description
] twice and [Change] of Collate/Offset.
Description
OPERATION GUIDE