Orientation Confirmation; Function Defaults - Kyocera TASKalfa 420i Operation Manual

Orientation Confirmation

Select whether to display a screen for selecting the orientation of the originals to be placed on the platen when
using the following functions. (For more information, refer to page 4-10 for Original Orientation.)
• Duplex
• Margin/Centering originals
• Border erase
• Combine mode
Orientation Confirmation Setting
Use the procedure below to select the default Orientation Confirmation setting.
1
Press the System Menu key.
2
Press [Common Settings] and [Change] of Orientation Confirmation.
3
Select the default for [Off] or [On].
4
Press [OK].

Function Defaults

Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed.
Set the defaults for available settings such as copying and sending. Setting the frequently-used values as
defaults makes subsequent jobs easier.
IMPORTANT: When you have changed the defaults, to enable the change immediately, move to the copy, send,
or document box screen and press the Reset key.
Original Orientation
Set the original orientation defaults. The available default settings are shown below.
Item
Top Edge Top
Top Edge Left
Refer to page 4-10 for Original Orientation.
Use the procedure below to select the default orientation when originals are placed on the platen.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Top Edge Top] or [Top Edge Left] for the default.
4
Press [OK].
OPERATION GUIDE
• Memo mode
• Page numbering
• Booklets
• Staple/Punch (optional feature)
Select the original's top edge at the top.
Select the original's top edge at the left.
], [Next] of Function Defaults and then [Change] of Original Orientation.
Default Setting (System Menu)
Description
8
8-15